Clarion iDXZ775USB owner manual In Case Of Difficulty, English, Problem, Cause, Measure

Models: iDXZ775USB

1 46
Download 46 pages 56.86 Kb
Page 42
Image 42
8. IN CASE OF DIFFICULTY

English

8. IN CASE OF DIFFICULTY

 

Problem

Cause

Measure

 

 

 

Power does not

Fuse is blown.

Replace with a fuse of the same amperage. If the fuse

 

turn on.

 

blows again, consult your store of purchase.

 

(No sound is

 

 

 

 

 

 

Incorrect wiring.

Consult your store of purchase.

 

 

 

produced.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No sound output

Power antenna lead is

1. Turn the unit off.

 

 

 

when operating

shorted to ground or

2. Remove all wires attached to the power antenna

 

the unit with

excessive current is required

lead. Check each wire for a possible short to

 

amplifiers or

for remote-on the amplifiers

ground using an ohm meter.

 

 

 

power antenna

or power antenna.

3. Turn the unit back on.

 

 

 

attached.

 

4. Reconnect each amplifier remote wire to the power

 

 

 

 

 

 

antenna lead one by one. If the amplifiers turn off

 

 

 

before all wires are attached, use an external relay

 

 

 

to provide remote-on voltage (excessive current

General

 

 

required).

 

 

 

 

 

 

 

 

Nothing happens

The microprocessor has

Turn off the power, then press

 

 

 

 

 

Reset button

 

 

when buttons are

malfunctioned due to noise,

the [RELEASE] button and

 

 

 

 

pressed.

etc.

remove the DCP.

 

 

 

 

 

 

Press the reset button for about

 

 

 

 

Display is not

 

2 seconds with a thin rod.

 

 

 

 

accurate.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DCP or main unit connectors

Wipe the dirt off with a soft cloth moistened with

 

 

are dirty.

cleaning alcohol.

 

 

 

 

 

 

 

 

 

No sound heard

The speaker protection circuit

1. Turn down sound volume. Function can also be

 

 

is operating.

restored by turning the power off and on again.

 

 

 

(Speaker volume is reduced automatically when

 

 

 

the speaker protection circuit operates).

 

 

 

 

 

2. If the sound is muted again, consult our service

 

 

 

department.

 

 

 

No sound heard

MP3/WMA/AAC files are

Write MP3/WMA/AAC files onto the disc properly.

 

 

absent in a disc.

 

 

 

 

 

 

 

 

 

 

 

 

Files are not recognized as

Use MP3/WMA/AAC files encoded properly.

 

 

an MP3/WMA/AAC file.

 

 

 

 

 

 

 

 

 

 

 

 

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo or

 

 

 

APPLE ISO file system.

 

 

 

 

 

 

 

 

 

CD/MP3/WMA/AAC

Sound skips or is

Compact disc is dirty.

Clean the compact disc with a soft cloth.

 

 

noise is mixed

 

 

 

 

 

 

noisy.

Compact disc is heavily

Replace with a compact disc with no scratches.

 

 

scratched or warped.

 

 

 

 

 

Sound is cut or

MP3/WMA/AAC files are not

Use MP3/WMA/AAC files encoded properly.

 

skipped.

encoded properly.

 

 

 

 

 

Noise is

 

 

 

 

 

 

generated or

 

 

 

 

 

 

with sound.

 

 

 

 

 

 

 

 

 

 

 

 

 

Sound is bad

Water droplets may form on

Let dry for about 1 hour with the power on.

 

 

 

directly after

the internal lens when the car

 

 

 

 

 

power is turned

is parked in a humid place.

 

 

 

 

 

on.

 

 

 

 

 

 

 

 

 

 

 

 

Wrong filename

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo or

 

 

 

APPLE ISO file system.

 

 

 

 

 

 

 

 

 

40 DXZ775USB

Page 42
Image 42
Clarion iDXZ775USB owner manual In Case Of Difficulty, English, Problem, Cause, Measure