Safety Symbols
To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the follow- ing safety symbols to indicate
Some or all of the symbols may not be used on this equipment. In addition, when drawings are included in this manual, labels on the equipment may not be shown on them.
Safety Symbols Used in Manual
A This indicates a very dangerous procedure that could result in death or serious
DANGER injury if not performed properly.
This indicates a hazardous procedure that could result in death or serious injury if A not performed properly.
This indicates a hazardous procedure or danger that could result in
Safety Symbols Used on Equipment and/or in Manual
The followmg safety symbols are used inside or on the equipment near operation locations, andlor in manual to provide information about safety items and operation precautions. Insure that you clearly understand the rnean- ings of the symbols and take the necessary precautions BEFORE using the equipment.
0
n
n
U
This indicates a prohibited operation. The prohibited operation is indicated sym- bolically in or near the barred circle.
This indicates an obligatory safety precaution. The obligatory operation is indi- cated symbolically in or near the circle.
This indicates warning or caution. The contents are indicated symbolically in or near the triangle.
This indicates a note. The contents are described in the box
These indicate that the marked part should be recycled.
MP1777A
10 GHz Jitter Analyzer Remote Control
Operation Manual Vol. 2
10 September 1998 (First Edition)
20 September 2002 (Fourth Edition)
Copyright O
All rights reserved. N o part of this manual may be reproduced without the prior written permission of the publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan
ii
