![](/images/new-backgrounds/1242280/24228095x1.webp)
EN
49
SYMPTOMPOSSIBLE CAUSE(S)
OTHER
The tape won’t eject. | ● The battery pack is running low. |
| ● If the LCD monitor is not open over 45 degrees, EJECT |
| switch does not function. |
Some functions are not available. | ● The Select Dial is set to “AUTO LOCK”. |
|
|
Vertical white lines appear when | ● This sometimes occurs when the contrast between the |
shooting a very bright object. | background and the object is great. It is not a defect of the |
| camcorder. |
Bright, | ● Sunlight is directly entering the lens. This is not a defect of |
in the LCD monitor and the | the camcorder. |
viewfinder. |
|
The rear of the LCD monitor is hot. | ● The light used to illuminate the LCD monitor causes it to |
| be hot. Close the LCD monitor to turn it off or set the |
| Power Switch to OFF, and let the unit cool down. |
Coloured bright spots appear all | ● The LCD monitor is made with |
over the LCD monitor. | However, black spots or bright spots of light (red, green or |
| blue) may appear constantly on the LCD monitor. These |
| spots are not recorded on the tape. This is not due to any |
| defect of the unit. (Effective dots: more than 99.99 %.) |
|
|
The indicators and the picture | ● This may occur when the surface or the edge of the LCD |
colour on the LCD monitor are not | monitor is pressed. |
clear. |
|
The LCD monitor, the viewfinder | ● Wipe them gently with soft cloth. Gently wipe the LCD |
and the lens have become dirty (ex. | monitor in a semicircle because wiping strongly spreads the |
fingerprints). | stain and it won’t come out easily. |
The picture is blurred in the Quick | ● This is normal while recording in the LP mode. Some noise |
Review or Retake mode. | may be present while recording in the SP mode (☞ pg. 8). |
An error number (i.e. E03) appears. | ● Turn the camcorder’s power off, then disconnect the |
| power source. After a few minutes, try turning the power |
| on again. If the error number still appears, consult your |
| nearest JVC dealer. |
|
|
The image is out of focus. | ● The dioptre needs to be adjusted (☞ pg. 10). |
| ● The scene being shot is adversely affecting the operation |
| of Auto Focus (☞ pg. 28). |
The date and time displays | ● If you remove the power source from the camcorder while |
disappear. | the power is on, all settings and selections are erased. Make |
| sure to turn the camcorder’s power off before disconnecting |
| the power source. |
The wrong date and time are | ● If you have not performed Date/Time Setting (☞ pg. 7), the |
displayed/recorded. | date and time are not displayed/recorded correctly. Be sure |
| that Date/Time setting is carried out. |
Even though the Lens Cover is open, the Lens Cover Warning indicator blinks.
●The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the Lens Cover.
The camcorder is a