
6.Type ch? to display information about using channels. The following screen is displayed:
Channel management commands:
ch | List all commands. |
Status legend: (AB)
A:Channel operational status ‘A’ = Channel is active. ‘I‘ = Channel is inactive.
B:Channel Type
| ‘V’ | = | ||
| ‘R’ | = | Raw – no emulation. | |
ch | – si <#> |
| Switch to a channel by its number. | |
ch – sn <name> | Switch to a channel by its name. | |||
ch | – ci <#> |
| Close a channel by its number. | |
ch – cn <name> | Close a channel by its name. |
Press <esc><tab> to select a channel.
Press <esc><tab>0 to return to the SAC channel.
7.Press Esc Tab to find an empty channel. You can now use
8.If operating system redundancy is required, make a mirrored drive of Microsoft Windows 2003 on the NEC Express5800/1000 series server (see the next section).
Creating a Mirrored Drive of Windows 2003
Use the following procedure to create a mirrored drive of Microsoft
Windows 2003 on the Express5800/1000 series server.
Note: Perform the following procedure after
Windows 2003 is installed and operating on Disk 0.
1.Make Disk 1 GPT. If Disk 1 has been formatted only, use Disk Management to convert Disk 1 to GPT.