NEC 1080Xd RS Cold Reset System, Execution, Function, 45. RS Display Screen, Service Processor

RS (Cold Reset System)

Execution:

This command can be executed on a partition in the following state:

! Automatic startup completed ! Execution of UP command.

The partition is in a DC POWER ON state.

Function:

Performs a cold reset of the system.

Note: This command performs a reset without any notification even if the OS (BIOS) is running.

Note: The RS command can be executed in Normal mode or

Maintenance mode.

Table 3-45. RS Display Screen

Screen Image	Reference
iSPyz:---> rsENTER>
CAUTION:
System will be reset without any notice to the softwares even if they are running.
Enter partition number (0-3/all/CR=exit) : all<ENTER>	A
Execute OK? (y/[n]) y<ENTER>	B
RS command was accepted. All partitions will be resetted soon.	C
[iSPyz:INFO.ccc] partition 0 : initializing HW.
[iSPyz:INFO.ccc] partition 1 : initializing HW.
:
:	D
:
[iSPyz:INFO.ccc] partition 0 : handed off the control to BIOS.
[iSPyz:INFO.ccc] partition 1 : handed off the control to BIOS.

Table 3-46. RS Display Screen References

Reference Description

AEnter a partition number

If you select “all”, all the configured partitions become the targets. However, the partitions that are already OFF do not become the targets

BDisplays the confirmation message. To execute, enter “y.”

CDisplays the RS command acceptance message. The actual process runs in the background.

DDisplays the state of the process running tin the background.

Service Processor 3-57