NEC 1080Xd manual Starting Up the System, Main Chassis AC Power Circuit Breaker System Operation

Starting Up the System

Start up the server system as follows.

1.Make sure all external devices, such as the console, keyboard, and mouse have been connected, and the power cords are connected (see the previous section, “Setting Up the Server”).

2.Turn on the circuit breaker or main switch to the system power source.

Note: If the server power cord is connected to a power control unit such as an UPS (Uninterruptive Power Supply), make sure that the power control unit is powered on.

3.Power on the console and any other external devices.

4.At the rear of the server cabinet, turn on the AC power circuit breaker for the Main Chassis (see Figure 2-3), and if installed, for the optional PCIX Unit (see Figure 2-4).

A

A AC Power Circuit Breaker

Figure 2-3. Main Chassis AC Power Circuit Breaker

2-4 System Operation