Extron electronic MGP 464 HD-SDI manual Window Presets section, you can do the following

Default presets

The MGP 464 is delivered with 30 different default window presets, which are stored in the MGP’s 128 preset memory locations. (Because there are more memory locations than presets, each default preset is stored in at least two locations.) The following figure shows the factory default preset window configurations. These presets can be used for any output rate. If you overwrite them, you can recover them by selecting Factory Defaults from the Advanced Configuration menu.

Preset #1

1,2,3,4

All Fullscreen

Preset #7

2

Preset #2

1	2
3	4

Preset #8

2

Preset #3 Preset #4

2	2
1	1
3	3
4	4

Preset #9 Preset #10

	Preset #5
2
3	1
4
	Preset #11

2

Preset #6
	2
1	3
	4
Preset #12
	2

1	3
	4

Preset #13

				2
		1
	3			4
		Preset #19
2			3	4
		1

3	1
4

Preset #14

	1
		2
	3			4
		Preset #20
		1
2			3	4

		1
				2
		Preset #15
	1			2
		3
				4
		Preset #21
1			2	3
4

1

2

Preset #16

1 2

4

3

Preset #22

	1	2
3	4

1

Preset #17

1

2 3 4

Preset #23

1 2 3 4

	1
	Preset #18
2	3	4

1

Preset #24

1 2 3 4

PRELIMINARY

Preset #25 Preset #26 Preset #27 Preset #28 Preset #29

1	1	1	2	1	2
2	2	3	4	3	4
3	3				1	2
4	4				3	4

Preset #30

1	2
3	4

Factory default preset configurations

In the Window Presets section, you can do the following:

Naming a window preset

To change the name of a preset,

1.	From the Select Preset menu in the Preset Save/Recall section, select a preset
	to rename. The name of your selected preset is displayed in the Preset Name
	field.
2.	In the Preset Name field, enter the name you want to give the selected preset.
	The following characters are may be used:
	Symbols: : / – + “ _ [space]
	Numerals: 0 through 9
	Letters: Lowercase a through z, uppercase A through Z
3.	Click the Change Preset Name button. The new name replaces the one you
	selected on the Select Preset menu.

MGP 464 • HTML Configuration and Control 5-21