Extron electronic MGP 464 HD-SDI manual X2 CY %2A X2 CY Cpn X! Cty, X3 , X3! CF, Cpn X! Cfl X3

Command/response table for IP SIS commands (continued)

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to processor)	(host to processor)	(Processor to host)

Bi-directional serial data port (continued)

Configure mode24 E X! * X2( CY } W X! %2A X2( CY Cpn X! • Cty X2( ]

View mode	E X! CP }	W X! CY	X2( ]
Configure flow control24	E X! * X3) , X3! CF }
		W X! %02A X3) %02C X3! CF

Select serial mode X2( for port X!.

X! = 01 through 99. For X2(:

0 = RS-232

1 = RS-422

NOnly the rear panel RS-232/422 port can be configured. Therefore, X! = 1.

MGP 464 • Software Configuration and Control 4-25

			Cpn X! • Cfl X3) , X3! ]
			Set flow control type X3) with X3! ms
			between bytes. For X3):
			H = Hardware.
			S = Software.
			N = None (default).
			X3! = 0000 through 0001; default = 0 ms.
View flow control	E X! CF }	W X! CF	X3) , X3! ]
Configure receive timeout24	E X! * X1& *	X2) * X2# * X2! CE }	Set the time that the MGP will wait for a
			response before terminating the command.

WX! %2A X1& %2A X2) %2A X2# %2A X2! CE

Cpn X! • Cce X1& , X2) , X2# , X2! CE ]

NX1& = Time in tens of milliseconds that the MGP will wait until receipt of the first response character before terminating the command. (Default = 10 = 10 ms; max. = 32767.)

X2) = Time in tens of milliseconds that the MGP will wait between characters being received via a serial port before terminating the current command or receive operation. (Default = 20 = 20 ms; max. = 32767.)

X2! = #L or #D. The letter parameter is case sensitive (requires capital D or capital L). For X2!: L = Length of the message to be received,

D = Delimiter value. A delimiter of ASCII 0A = 10D.

#= Byte count (for L) or a single ASCII character expressed in decimal form (for D).

Byte count # can be 0 through 32767; default = 0. The ASCII decimal # can be 0 through 00255; default = the byte count. A 3-byte length = 3L. The response includes leading zeros.

X2# = Priority Status for port X! receiving timeouts. For X2#:

0 = Use Send data string command parameters (default); 1 = Use Configure receive timeout command parameters. The response includes leading zeros.

View receive timeout E X! CE } W X! CE X1& , X2) , X2# , X2! ]

PRELIMINARY