Extron electronic MGP 464 HD-SDI manual Window Configuration menu, Sync Polarity submenu

Sync Polarity submenu

The display device may require a particular combination of horizontal (H) and vertical (V) sync signal polarities. Rotate either the horizontal Adjust ([) or the vertical Adjust ({) knob to select the sync polarity. The options are H-V-, H+V-, H-V+, H+V+, or NA (appears when YUV Bi-lvl or YUV TriLvl is selected). The default is H-V-.

Window Configuration menu

The Window Configuration menu allows you to set window front/back priority, add colored borders to the windows, select which window transition effect to use when muting (closing) and unmuting (displaying) a window, and specify the duration of the selected effect.

Output

Configuration

Menu

Window

Configuration

Rotate either Adjust knob to adjust the submenus.

Next

Window Priority F <1> 2 3 4 B

Next

Window 1 Border

None

Next

Window 2 Border

None

Next

Window 3 Border

None

Next

Window priority
Default: 1 2 3		4
Window 1 border color
•	Off	•	Magenta
•	Red (default)	•	Cyan
•	Green	• Yellow
•	Blue	•	Black

•White

Window 2 border color

• Off	• Magenta
• Red	• Cyan

•Green (default) • Yellow

• Blue • Black

•White

Window 3 border color

•	Off	• Magenta
• Red		• Cyan
•	Green	• Yellow
•	Blue (default)	• Yellow

•White

Window 4 Border

None

Next

Window Effect

Cut

Next

Effect Duration

0.5second(s) Next

Window 4 border color

•	Off	•	Magenta (default)
• Red		• Cyan
•	Green	• Yellow
•	Blue	•	Black

•White

Window switching effect
•	Cut (Default)	•	Soft Wipe Curtain Out
•	Dissolve	•	Hard Wipe Up
•	Soft Wipe Up	•	Hard Wipe Down
•	Soft Wipe Down	•	Hard Wipe Right
•	Soft Wipe Right	•	Hard Wipe Left
•	Soft Wipe Left	•	Hard Wipe Center In
•	Soft Wipe Center In	• Hard Wipe Center Out
• Soft Wipe Center Out		• Hard Wipe Square In
• Soft Wipe Square In		• Hard Wipe Square Out
•	Soft Wipe Square Out	• Hard Wipe Curtain In
•	Soft Wipe Curtain In	•	Hard Wipe Curtain Out

Effect duration (in seconds)

0.0 to 5.0 seconds

in 0.1 second increments Default: 0.5 seconds

PRELIMINARY

Window Configuration menu flow

NThe menus time out and return to the default cycle after 20 seconds of inactivity; however, any selections you made with the Adjust knobs are saved and remain in effect.

Window Priority submenu

The Window Priority submenu allows you to set how the windows will overlap one another or “stack” on the display. For example, the window with priority 1 is displayed in front of all the other windows. If the top priority window is sized to fill the screen, the other windows are not visible.

By default, the Window Priority submenu displays the numbers of the four windows in order, from left to right, with window 1 having first priority. To change a window’s priority,

1.	Select a window by rotating the vertical Adjust ({) knob to move the angle
	brackets on the LCD screen to the number of the window whose priority level
	you want to change.
2.	Rotate the horizontal Adjust ([) knob to move the bracketed window
	number to the desired priority position. For example, if you want window 3
	to display in front of all the other windows (priority 1), move <3> all the way
	to the left, following the letter F on the LCD screen.
3.	Repeat steps 1 and 2 as desired for each additional window whose priority
	you want to change.

MGP 464 • Operation 3-13