Extron electronic MGP 464 HD-SDI manual X50 Flm, Img X50@, Film mode, Auto image

Command/response table for SIS commands (continued)

Command	ASCII (Telnet)	Response	Additional description
	(host to processor)	(processor to host)
Film mode
Enable film mode	18 * X50) * 1 #	X50) Flm 1 ]	Enable film mode for input X50). (Auto-senses for
			3:2 or 2:2 pull-down.)
			X50) = 1 through 19.
Disable film mode	18 * X50) * 0 #	X50) Flm 0 ]	Disable film mode for input X50). (Blocks the
			deinterlacer from using either pull-down method.)
View film mode status	18 * X50) #	0 ] (off) or 1 ] (on)	View the current film mode setting for input X50).
Auto image
Run Auto image	55 * X50@ #	Img X50@ ]	Runs Auto image on window X50@.
			X50@ = 1 through 4.

MGP 464 • Software Configuration and Control 4-23

PRELIMINARY