Square wipe — A square wipe causes the new window to appear to unroll over the other one in one of two ways:

In from the top, bottom, right, and left edges to the center of the window

Out from the center to the four edges of the window

This effect creates a square shaped transition.

A square wipe can have a soft (fuzzy) or a hard (sharp) leading edge.

Curtain wipe — A curtain wipe causes the new window to appear to unroll over the other one in one of two ways:

In from the left and right edges to the center of the window

Out from the center to the right and left edges of the window

A curtain wipe can have a soft (fuzzy) or a hard (sharp) leading edge.

Effect Duration submenu

Use this submenu to set the amount of time the MGP 464 takes to complete a transition effect. Select from durations ranging from 0.0 to 5.0 seconds, in

0.1second increments. (Duration is not available with the cut effect.) To set an effect duration,

1.

Press the Menu button repeatedly until Window Configuration is displayed

 

on the LCD screen.

2.

Press the Next button until Effect Duration is displayed.

3.

Rotate either the horizontal Adjust ([) or the vertical Adjust ({) knob to

 

select an effect duration.

MGP 464 • Operation 3-15

PRELIMINARY

Page 39
Image 39
Extron electronic MGP 464 HD-SDI manual Out from the center to the four edges of the window, Effect Duration submenu