Extron electronic MGP 464 HD-SDI manual X3$ CX, X1$ CI Ipx X3$, X1 CS, X1$ CG

Command/response table for IP SIS commands (continued)

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to processor)	(host to processor)	(Processor to host)
IP setup commands (continued)

MGP 464 • Software

Set daylight saving time24 E X3$ CX }

Read daylight saving time	E CX }
Set DHCP on24	E 1DH }
Set DHCP off24	E 0DH }
View DHCP mode	E DH }
Set IP address24	E X1$ CI }

WX3$ CX

WCX

W1DH

W0DH

WDH

WX1$ CI

Ipx X3$ ]	X3$ is the daylight saving time of day.
	Daylight saving time (DST) is a one-hour
	offset that is observed in the USA and parts of
	Europe and Brazil. For X3$:
	0 = off/ignore
	1 = on in northern hemisphere
	2 = on in Europe
	3 = on in Brazil
	For example, California uses GMT -8:00
	from April to October and -7:00 GMT from
	November to March. DST should be turned
	off in Hawaii, American Samoa, Guam, Puerto
	Rico, the U.S. Virgin Islands, and Arizona
	(excluding the Navajo Nation).
X3$ ]
Idh1 ]
Idh0 ]
Idh X% ]	X% = DHCP on/off status: 0 = off; 1 = on.
Ipi • X1$ ]	X1$ = IP address (xxx.xxx.xxx.xxx). Leading
	zeros in each of the four fields are optional in
	setting values.

Configuration and Control 4-31

Read IP address24	E CI }	W CI	X1$ ]	Leading zeros in each of the four fields are
				suppressed in returned values.
Read hardware address (MAC)	E CH }	W CH	X1* ]	X1* = hardware media access control (MAC)
				address (xx-xx-xx-xx-xx-xx).
Set subnet mask24	E X1( CS }	W X1( CS	Ips • X1( ]	X1( = subnet mask (xxx.xxx.xxx.xxx). Syntax
				is the same as for IP addresses. Leading zeros
				are optional in setting values.
Read subnet mask	E CS }	W CS	X1( ]	Leading zeros are suppressed.
Set gateway address24	E X1$ CG }	W X1$ CG	Ipg • X1$ ]	X1$ = IP address (xxx.xxx.xxx.xxx). Leading
				zeros are optional.
Read gateway address	E CG }	W CG	X1$ ]

PRELIMINARY