43
RS232C Command T
RS232C Command Tables
ables
Time Read Command Table
Status read command Item
CR PANELH Status of accumulated lifetime of panel.
The same as CR_LAMPH Command
CR MONH Status of accumulated life time of monitor
The same as CR_PROJH Command
Sound control Read Co mmand Table
Status read command Item
CR VOLUME Status of volume value.
CR MUTE Status of MUTE.
Setting Read Command Table
Status read command Item
CR LANG Status of Language selection.
CR P-MANE Status of Power management setting
CR TILE Status of Tile mode ON/OFF setting
CR TILE-HSETS Status of Tile mode, the number of Horizontal array.
CR TILE-VSETS Status of Tile mode, the number of Vertical array.
CR TILE-HLOCAT Status of Tile mode, the number of Horizontal allocation.
CR TILE-VLOCAT Status of Tile mode the number of Horizontal allocation.
CR TILE-BZLHADJ Status of Tile mode, the width of bezel Horizontal
CR TILE-BZLVADJ Status of Tile mode, the width of bezel (Vertical)
CR ONPROG Status of On Program information/
CR WINTERMODE Status of Winter mode Information.
CR PANELPROTECT Statuses of Panel protect Information.
CR LEDLIGHT Status of LED light Information.
CR AVAUTOSHUT Status of AV auto shut OFF Information.
CR CHILDLOCK Statuses of Child lock Information.
CR RCINHIBITION Status of RC Inhibit Information.
Other Read Command Table
Status read command Item
CR STATUS Status of the operation of the monitor.
CR SIGNAL Status of with or without sig nal.
CR FREEZE Status of Freeze setting.
CR FANLOCK Statuses of fun lock error.
CR TEMP Status of current temperature value.
UK5 Read Command Table(Basic Comman d)
Command Item Note
CR0 Power On, Standby, power error,
CR1 Input Mode AV1 , AV2, ..., DVI, PC
CR WIDE Wide mode Auto, Normal, Full,
CR PICTURE Picture mode Dynamic, Standard,
CR SIGNAL Signal existence Signal / No signal
CR CHILD Child lock On / Off
CR PSAVE Power save On / Off
CRTM Panel usage time
CR RMC RC inhibition On / Off
CR MDL Model number 52LH1
Error code Table
Error code
Receiving the data that canno t be decoded
The wrong indication of parameter
Wrong figured number, or wrong word is included.
Normal receiving no error
If the command of out of range is directly entered
valuable parameter.
No matching with Hardware
(Command for op tional function wh ich is not equipp ed.)
If the command of “Out of range” is entered by
inclement or decrements by numeric value.
While capturing the picture, no execution. Wait and
transmit command again.
While PIN code is in operation, no execution.
Wait and transmit command again.
The errors not including above.