1. INTRODUCTION AND SAFETY
Transport
The original packaging should be used when transporting Automower® over long distances.
To safely move from or within the working area:
1.Press the STOP button to stop the mower.
If the
You select the four digit PIN code when you start the mower for the first time, see page 32.
2.Move the main switch to the OFF position if you intend to carry the mower.
3.Carry the mower by the handle at the rear under the mower. Carry the mower with the blade disc away from the body.
Maintenance
WARNING
When the mower is turned upside down the main switch must always be set to the OFF position.
The main switch should be set to the OFF position during all work on the mower’s underframe, such as cleaning or replacing the blades.
•Inspect Automower® each week and replace any damaged or worn parts.
Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced, see 8. Maintenance on page 65.
ON
OFF
English - 9
