3.INSTALLATION
3.5Connecting the boundary wire
Connect the boundary wire to the charging station:
1.Lift up the cover on the charging station:
• Grip under the edge of the cover with both hands and pull straight out towards the sides.
• Now lift the cover straight up.
2.Slide in the ends of the boundary wire in the
lowermost holes on the charging station and catch them in the uppermost holes.
The right hand wire end should be inserted in the right hand hole, and the left hand wire end in the left hand hole.
IMPORTANT INFORMATION
The boundary wire must not be crossed when connecting to the charging station. Therefore the right hand wire end must be connected to the right hand connector on the charging station and vice versa.
30 - English
