Avaya P332G-ML manual Set radius authentication server ip-address

Chapter 5 CLI – Layer 2

Set radius authentication server Command

Use the set radius authentication server command to set a primary or secondary RADIUS server IP address.

The syntax for this command is:

set radius authentication server <ip-address>

<primarysecondary>

ip-addr	IP address of the RADIUS authentication server
primary	default - Primary authentication server
secondary	Secondary authentication server

Example:

P330-N(super)# set radius authentication server 192.168.38.12 primary

Clear radius authentication server Command

Use the clear radius authentication server command to remove a primary or secondary RADIUS authentication server.

The syntax for this command is:

clear radius authentication server[{primarysecondary}]

Set radius authentication retry-time Command

Use the set radius authentication retry-timecommand to set the time to wait before re-sending an access request.

The syntax for this command is:

set radius authentication retry time <time>

time retry time in seconds

P332G-ML User’s Guide 123