Avaya P332G-ML manual Ip access-default-action policy-list-number default- action

Chapter 6 CLI – Layer 3

ip access-default-action Command

Use the ip access-default-actioncommand to set the default action for a specific policy list.

The syntax for this command is:

ip access-default-action <policy-list-number> <default- action>

<policy-list-number> integer (100..199)

<default-action>default-action-denydefault-action-permit

Example:

Router-N>ip access-default-action 101 default-action-deny

ip access-list-name Command

Use the ip access-list-namecommand to set a name for a policy list.

The syntax for this command is:

ip access-list-name<policy-list-number> <name>

<policy-list-number>	integer (100..199)
<name>	list name

Example:

Router-N>ip access-list-name 101 morning

Note: If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".

186 P332G-ML User’s Guide