General Information
TPG Default Name
The TPG name is made up of the two letters 'IC' and the device number. The device number consists of the last six numbers of its hardware address.
TPG Default Name
IC0001ff
Device number
Fig. 2: Example: Default name
The TPG default name is found on the TPG Homepage, the
IP Address
The IP address is the unique address of each node in a network, i.e. an IP address may occur only once on a local network. The system administrator usually assigns the IP address. The address must be saved in the TPG60 to make sure that it can be addressed within the network.
Host Name
The host name is an alias for an IP address. The host name uniquely identifies the TPG60 in the network and makes it easier to remember.
Gateway
Using a gateway, you can address IP addresses from external networks. If you wish to use a gateway, you can configure the relevant parameter via the TPG Homepage or the
TPG60 User Manual | 9 |
