SEH Computertechnik TPG60 user manual Resetting Parameters via the TPG Homepage

Parameter

What do you want to do?

the parameters to their default settings to install the TPG60 in a different network.

If the TPG60 is protected by a password, the password has to be entered before resetting the parameters. Only by using the status button on the operating panel of the TPG60 can the parameters be reset without entering the password.

†’Resetting Parameters via the TPG Homepage’ Ö37

†’Resetting Parameters via the InterCon-NetTool’ Ö37

†’Resetting Parameters via an FTP Connection’ Ö38

†’Resetting Parameters via the TPG60 Status Button’ Ö38

Resetting Parameters via the TPG Homepage

Proceed as follows:

1.Start the TPG Homepage.

2.Select Actions – Default Settings.

ªThe parameters are reset.

Resetting Parameters via the InterCon-NetTool

Proceed as follows:

1.Start the InterCon-NetTool.

2.Mark the TPG60 in the print server list.

3.Select Actions – Default Settings from the menu bar.

4.Click Finish.

ªThe parameters are reset.

TPG60 User Manual 37