Appendix |
|
|
61 | 1. | Try to turn on Level 2 cache. |
| Note: If L2 cache is already turned on in POST 3D, this part will be | |
| skipped. | |
| 2. | Set the boot up speed according to Setup setting. |
| 3. Last chance for Chipset initialization. | |
| 4. | Last chance for Power Management initialization. (Green BIOS |
| only) | |
| 5. | Show the system configuration table. |
62 | 1. | Setup daylight saving according to Setup value. |
| 2. | Program the NUM Lock, typematic rate & typematic speed |
| according to Setup setting. | |
63 | 1. | If there is any changes in the hardware configuration, update the |
| ESCD information. (PnP BIOS only) | |
| 2. | Clear memory that have been used. |
| 3. | Boot system via INT 19H. |
FF | System Booting. This means that the BIOS already pass the control | |
| right to the operating system. | |
B-2 Unexpected Errors:
POST (hex) | DESCRIPTION |
B0 | If interrupt occurs in protected mode. |
B1 | Unclaimed NMI occurs.0 |
