| Installation |
Figure 3
To remove the SIMM module: release the clips on both sides of the SIMM socket (figure 4).
SIMM Release
Clip
Figure 4
DIMM Module Installation
Figure 5 displays the notch marks and what they should look like on your DIMM memory module.
DIMMs have 168-pins and two notches that will match with the onboard DIMM socket. DIMM modules are installed by placing the chip firmly into the socket at a 90 degree angle and pressing straight down (figure 6) until it fits tightly into the DIMM socket (figure 7).
LEFT KEY ZONE | CENTER KEY ZONE |
(UNBUFFERED) | (3.3 V DRAM) |
| Figure 5 |
Page
