EPoX Computer KP6-LA specifications Simm Module Installation, Dimm

Installation					KP6-LA
	DIMM 3	DIMM 2	DIMM 1	SIMM 3-4	SIMM 1-2
Total Memory			(Bank 2)		(Bank 2)
	(Bank 0)	(Bank 1)		(Bank 3)
			Shared		Shared
	EDO/SDRAM*	EDO/SDRAM*	EDO/SDRAM*	EDO
= 1GB	8MB, 16MB, 32MB	8MB, 16MB, 32MB,	8MB, 16MB, 32MB,	4MB, 8MB, 16MB,	None
Maximum	64MB, 128MB, 256M	64MB, 128MB, 256MB	64MB, 128MB, 256MB	32MB, 64MB, 128MB
	X 1	X 1	X 1	X 2
	EDO/SDRAM*	EDO/SDRAM*		EDO	EDO
= 1GB	8MB, 16MB, 32MB	8MB, 16MB, 32MB,	None	4MB, 8MB, 16MB,	4MB, 8MB, 16MB,
Maximum	64MB, 128MB, 256M	64MB, 128MB, 256MB		32MB, 64MB, 128MB	32MB, 64MB, 128MB
		X 1		X 2	X 2
	EDO/SDRAM*	EDO/SDRAM*	EDO/SDRAM*
= 768MB	8MB, 16MB, 32MB,	8MB, 16MB, 32MB,	8MB, 16MB, 32MB,	None	None
Maximum	64MB, 128MB, 256MB	64MB, 128MB, 256MB	64MB, 128MB, 256MB
	X 1	X 1	X 1
	EDO/SDRAM*	EDO/SDRAM*		EDO
= 768MB	8MB, 16MB, 32MB,	8MB, 16MB, 32MB,	None	4MB, 8MB, 16MB,	None
Maximum	64MB, 128MB, 256MB	64MB, 128MB, 256MB		32MB, 64MB, 128MB
	X 1	X 1		X 2
	EDO/SDRAM*			EDO	EDO
= 768MB	8MB, 16MB, 32MB,	None	None	4MB, 8MB, 16MB,	4MB, 8MB, 16MB,
Maximum	64MB, 128MB, 256MB			32MB, 64MB, 128MB	32MB, 64MB, 128MB
	X 1			X 2	X 2
	EDO/SDRAM*	EDO/SDRAM*
= 512MB	8MB, 16MB, 32MB,	8MB, 16MB, 32MB,	None	None	None
Maximum	64MB, 128MB, 256MB	64MB, 128MB, 256MB
	X 1	X 1
	EDO/SDRAM*			EDO
= 512MB	8MB, 16MB, 32MB,	None	None	4MB, 8MB, 16MB,	None
Maximum	64MB, 128MB, 256MB			32MB, 64MB, 128MB
	X 1			X 2
				EDO	EDO
= 512MB	None	None	None	4MB, 8MB, 16MB,	4MB, 8MB, 16MB,
Maximum				32MB, 64MB, 128MB	32MB, 64MB, 128MB
				X 2	X 2
				EDO
= 256MB	None	None	None	4MB, 8MB, 16MB,	None
Maximum				32MB, 64MB, 128MB
				X 2
	EDO/SDRAM*
= 256MB	8MB, 16MB, 32MB,	None	None	None	None
Maximum	64MB, 128MB, 256MB

X1

*SDRAM only supports 8, 16, 32, 64, 128MB DIMM modules. Table 1

SIMM Module Installation

The SIMM memory modules only fit into the sockets one way. There is a notch at one end of the memory that must fit into the SIMM socket.

Memory needs to be placed firmly into the SIMM socket at a 45 degree angle. Then move it to the 90 degree position and make sure that all contacts are aligned. It will then click into place (figure 3).

Page 3-6