EN 7
(MONO)
IN OUT
AUDIO
VIDEO CH3 CH4
ANTENNA IN
TV OUT
CABLE
BOX
IN OUT
S VIDEO
L
R
VHF/UHF
REMOTE
RF Cable (supplied)
Matching
Transformer
(not supplied)
AC Power
Cord
Audio/Video
Cable
(supplied)
TV
Back of VCR
To Antenna Input
To AC Outlet
Antenna or Cable
Flat Feeder
Coaxial Cable
NOTES:
To make the most of the Super VHS picture performance we
recommend that you use the supplied S-VIDEO cable to
connect your VCR to a TV with an S-VIDEO input connector.
To operate the VCR with your TV using the S-VIDEO connec-
tion, set your TV to the AV mode using the TV's remote
control.
You can also use the TV/VCR button on the VCR's remote
control to set your TV to the AV mode. (
pg. 56)
S-VIDEO Connection
CONNECT VCR TO TV
a–Connect both the RF cable and the AV cables to the TV as
explained in step 3 of "Basic Connections" ( pg. 6).
b–Connect the S-Video cable between the S-VIDEO OUT
jack on the rear of the VCR and the S-Video Input on the
TV.
S-Video Cable
(supplied)
To S Video Input
Connector
Connect the power plug to an
AC outlet before installing the
lithium battery. (See below)
Installing/Removing the lithium battery
1Make sure that the power plug is connected to an AC outlet
and turn off the VCR.
2Open the battery cover while pressing the release tab as
illustrated.
3Insert a lithium battery with the plus (+) side up and push it
in.
To remove the lithium battery, press the latch A down-
ward using a pointed non-metallic object, then pull out
the lithium battery.
4Close the battery cover until it clicks in place.
Be sure to connect the power plug to an AC outlet first
before installing the lithium battery; otherwise, the
battery's service life will be drastically shortened.
A
To ANTENNA IN
To TV OUT
To AUDIO/
VIDEO OUT
To S VIDEO OUT
To Audio/Video Input