Plus UP-1100 I n s t a l l a t i o n, Positioning the unit, Projecting distance and image size

Models: UP-1100

1 34
Download 34 pages 39.44 Kb
Page 9
Image 9
I n s t a l l a t i o n

I n s t a l l a t i o n

The distance from the unit lens to the screen determines to the size of the projected image, therefore, you need to consider the place where you set up the unit and screen before making connections. You also need to consider the screen size and height of the unit and screen as other important factors.

Tip

A non-glossy wall may be used as a substitute for a screen.

• Carrying The Data Projector WARNING

• Carrying The Data Projector

Always carry your Data projector in the carrying case. Ensure that the power cord and any other cables connecting to video sources are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.

Only use your Data projector on a solid flat level surface. If the projector falls to the ground, you can be injured and the projector severely damage.

Do not use the Data projector where temperatures vary greatly. The projector must be used at temperatures between 5°C (41°F) and 35°C (95°F).

Do not expose the Data projector to moisture, dust, or smoke. This will harm the screen image.

Ensure that you have adequate ventilation around your Data projector to allow heat dissipation. Do not cover the vents on the bottom or the side of the projector.

Positioning the unit

The projected image becomes larger as the distance between the unit and screen increases. The minimum image size is about 24 inches (0.61

m)diagonally at a distance of about 1.2 m (3 feet) and the maximum size is about 300 inches (7.6 m) at a distance of 12.0 m (39.37 feet) from the screen. Use the following information when you fix the position of the unit.

Projecting distance and image size

Screen

Screen

Height

11 to 15 degrees

Screen width

Screen size (diagonal)

Distance from center of lens to lower edge of screen

Positioning the unit (represented as “H” in the table and chart below)

Projecting distance (represented as “L” in the table and chart below)

• Horizontal projection position

 

Lens centered left to right

 

• Vertical projection position

 

 

Screen sizeProjection distance (L)

mDimension (H) mm

 

 

 

 

 

 

 

 

Inches

Wide (W)

Telephoto (T)

Both W & T

 

 

 

 

 

 

 

 

24

 

 

 

1.2

 

70

 

 

 

 

 

 

 

 

 

 

 

40

1.6

 

2.1

 

122

 

 

 

 

 

 

 

 

60

2.4

 

3.1

 

176

 

 

 

 

 

 

 

 

80

3.2

 

4.2

 

238

 

 

 

 

 

 

 

 

100

4.0

 

5.3

 

291

 

 

 

 

 

 

 

 

200

8.1

 

10.6

 

599

 

 

 

 

 

 

 

 

300

12.3

 

 

 

 

891

 

 

 

 

E – 9

Page 9
Image 9
Plus UP-1100 I n s t a l l a t i o n, Positioning the unit, Projecting distance and image size, Screen size, Wide W