a c c e s s o r i e s
are missing, contact your dealer. Please save the original box Projector.
Wired remote control cable (4m) [1]
For computer connection |
|
PC/Macintosh multicable | Monitor adapter |
(2m) [1] | (for Macintosh) [1] |
PC audio cable (2m) [1]
Power cable (mains lead) (4m) [1]
Carrying case [1]
Accessory pocket
P r e p a r i n g t h e
r e m o t e c o n t r o l
Inserting the batteries
1 Press firmly and slide the battery cover off.
2 Insert the sup- plied two batter- ies (size AA/R6). Ensure that the polarities (+ and
3Slip the cover back over the
batteries until it s n a p s i n t o place.
Notes
•If the remote control gets wet, wipe it dry immediately.•Avoid excessive heat and humidity.•If you will not be using the remote control for a long time, remove the batteries.
•Do not mix new and old or different types of batteries.•There are operations that can only be carried out by remote control. Handle the remote control carefully.
Remote control effective range
Each side of the unit has a remote sensor as illustrated below.
The controllable range is 50 degrees horizontally and 30 degrees vertically relative to a line that is at a right angle to the remote sensor. And the distance between the point of the remote control and remote sensor must be shorter than four meters.
Tip
You can also use the remote control as a wired remote control (see page 15).
How to use the carrying case
Main unit
Notebook computer and accessories
The bottom of the unit should face this side.
30˚ 50˚50˚
30˚
E – 5