![O t h e r s](/images/new-backgrounds/121467/12146759x1.webp)
O t h e r s
T r o u b l e s h o o t i n g
This section helps you resolve problems you may encounter while setting up or using your
Common Problems & Solutions
Problem | Check These Items | |
|
|
|
Does not turn on | • | Check that the cord is plugged in and that the power switch on the back panel is |
|
| on. (See page 16.) |
| • | Check the status light to see if the projector has overheated or the lamp usage |
|
| exceeds 1100 hours. (See pages 31, 29, and 32.) |
|
|
|
No picture | • | Use the menu icons to select your source (Video, |
|
| 21.) |
| • | Ensure your cables are connected properly. (See pages 11 to 15.) |
| • | Adjust the brightness and contrast. (See page 27.) |
| • | Remove the lens cap. (See page 16.) |
| • Is the POWER indicator blinking? (See page 16.) | |
|
|
|
Image isn’t square to the screen | • | Reposition the projector to improve its angle to the screen. (See page 16.) |
|
|
|
Picture is blurred | • | Adjust the focus. (See page 17.) |
| • | Reposition the projector to improve its angle to the screen. (See page 16.) |
| • | Ensure that the distance between the projector and screen is within the adjustment |
|
| range of the lens. (See pages 9 and 10.) |
|
|
|
Remote control does not work | • | Install new batteries. (See page 5.) |
| • | Make sure there are no obstacles between you and the projector. |
| • | Stand within 13 feet (4m) of the projector. (See page 5.) |
|
| |
The STATUS indicator is lit or | See the Status Light message chart on the next page. | |
blinking |
|
|
|
| |
Cross color in RGB mode | If “Auto Picture” is off, turn it on. If “Auto Picture” is on, turn it off and balance | |
| the image with the Picture Adjustment icon and Fine Picture Adjustment icon. | |
| (See page 26.) | |
|
|
|
E – 30