BR
SET
POWER
CABLE/DBS
1 |
| 2 | 3 |
| |
| ENTER |
|
| 2 | |
4 | 5 | 6 | NUMBER | ||
| |||||
|
| ||||
7 |
| 8 | 9 |
| |
|
| 0 |
| 4 |
1
STOP
3
TV CH+/–
CABLE BOX BRAND NAME | BRAND CODE |
|
|
ARCHER | 01, 05, 17 |
CABLETENNA | 01, 17 |
CABLEVIEW | 15, 16, 17, 21, 25 |
CITIZEN | 15, 16, 17, 21, 25 |
CURTIS | 02 |
DIAMOND | 01, 17 |
EASTERN | 19 |
GC BRAND | 15, 16, 17, 21, 25 |
GEMINI | 15 |
GENERAL INSTRUMENTS | 01, 04, 06, 11, 12, 15 |
HAMLIN | 10, 18, 19, 23 |
JASCO | 15 |
JERROLD | 01, 04, 06, 11, 12, 15 |
NOVAVISION | 02 |
OAK | 07 |
PANASONIC | 13, 14 |
PULSER | 15, 16, 17, 21, 25 |
RCA | 13, 14 |
REGAL | 10, 18, 19, 23 |
REGENCY | 19 |
REMBRANDT | 01, 16, 17 |
SAMSUNG | 05, 16, 24 |
SCIENTIFIC ATLANTA | 02 |
SIGMA | 07 |
SL MARX | 05, 16, 17, 24, 25 |
SPRUCER | 13, 14 |
STARGATE | 05, 15, 16, 17, 21, 24, 25 |
TELEVIEW | 05, 16, 24 |
TOCOM | 01, 04, 16 |
UNIKA | 01, 17 |
UNIVERSAL | 16, 17, 25 |
VIDEOWAY | 03, 09, 22 |
ZENITH | 03, 09, 22 |
|
|
EN57
Cable Box Multi-Brand
Remote Control
The VCR's remote control can control functions on the brands of cable boxes listed below. Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes.
TURN ON THE CABLE BOX
1 Turn the power on using the cable box’s remote control.
ENTER CABLE BOX BRAND
2 While holding down CABLE/DBS on the VCR's remote control, press MBR SET and use the NUMBER keys to enter the cable box brand number from the chart in the left column and then press STOP.
Follow the example shown below.
The cable box's power should go off. If it does, try other operations ( step 3).
Once you have set the remote control to operate the cable box, you don't have to repeat this step until you replace the remote control's batteries.
OPERATE CABLE BOX
3 First, while holding down CABLE/DBS, press the corresponding button: POWER, TV CH
For some brands of cable box, you must press ENTER after having pressed the NUMBER keys.
To change the cable box's channel, press TV CH +/– or the NUMBER keys. (The CH +/– button can be used to change the VCR's channel only.)
NOTES:
Depending on the type of cable box, there may be cases where some or all functions cannot be operated using the remote control.
It's not possible to set the remote control for both your cable box and a DBS receiver at the same time. You can only set the remote control to operate one of these units at a time.
(Ex.) To set remote control to RCA 14:
CABLE/ MBR SET
DBSA/B
1 4 STOPRelease
Hold | Press in succession |
down |
|