EPoX Computer KP6-LA specifications Easy Installation Procedure, Section Configure Jumpers

KP6-LA Installation

Easy Installation Procedure

Easy Installation Procedure

The following must be completed before powering on your new system:

3-1. Configure Jumpers to match your hardware

3-2. Install memory chips

3-3. Install Pentium II Processor

3-4. Device Connectors

Section 3-1

Configure Jumpers

EPoX designs all motherboards with the fewest jumpers to make your install fast and easy.

The following will describe all of the jumpers that you are required to set before moving on to step 3-2.

Note: The jumpers as depicted as shown (Figure 1) in their correct physical orientation.

1	BIOS Voltage Setting
JP2:	JP2, JP3: =		1-2	- +5V Flash (Default)
JP3:		=	2-3	- +12V Flash
1
	CMOS Clear
JP5:	JP5:	=	1-2	- Run Mode (Default)
1		=	2-3	- Clear CMOS

Page 3-3