Uninstalling the Light Fixture
7-14. Remove the lower switch housing screws, then remove the lower switch housing.
7-15. To uninstall the light fixture, first disconnect the 9-pin plug connectors between the black wire and the black/white wire.
7-16. Disconnect the plug connectors between the two white wires.
7-17. Uninstall the nut and washer from the end of the light fixture inside the lower switch housing.
7-18. Unscrew the threaded rod of the light fixture from the lower switch housing.
7-19. Remove the light fixture from the lower switch housing pulling disconnected wires through the hole in the center of the lower switch housing.
Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole.
7-20. Install the switch housing cap and plug button to the lower switch housing.
7-21. Once you have uninstalled the light fixture, continue with step 7‑6.
7-22. Re-attach the lower switch housing back to the fan and reinstall the lower switch housing screws.
