Installation Instructions
Using the Grill
Step 2: Connect to gas supply
1.The inlet to the appliance is ISO 7 - Rp 1⁄2” internal thread situated towards the top right hand rear corner.
2.Fit the bayonet connection to the wall in the shaded area as shown.
The shaded area shown is applicable to installations in minimum depth cabinets.
If more room is available, the bayonet fixing area can be extended, provided that the flexible tube does not obscure the fan intake.
60 mm |
|
| 60 |
| mm |
Rear | 60 mm |
Wall | square |
3.Use a 900mm - 1125mm length of flexible connector. The flexible connector shall be fitted such that it cannot come into contact with a moveable part of the housing unit (eg; drawer) and does not pass through any space susceptible of becoming congested. Make sure that the flexible connector does not block the cooling fan inlet.
4.Flexible connections should be to BS669. Parts of the appliance likely to come into contact with a flexible connector have a temperature rise less than 70°C.
5.Parts of the cooker likely to come into contact with the flexible hose have a temperature rise less than 70˚C.
6.Rigid connections must be accessible to disconnect for servicing. Cut a 150mm square hole in the right hand rear corner of the support shelf for the supply pipe.
7.Make sure all connections are gas sound.
Using the grill
Push the grill pan towards the back of the shelf, to position it under the grill.
Variation in grilling can be achieved by setting the grill between the large and small flame symbols, or by moving the grill pan up or down. Important: Never operate the grill between the large flame and the off position.
The speed of grilling can also be controlled by selecting a higher or lower shelf position.
Always use the top shelf position for fast toasting.
For toasting, and for grilling foods such as bacon, sausages or steaks, use a higher shelf position.
For thicker foods such as chops or chicken joint pieces, use a middle to low shelf position.
The grill trivet, inside the grill pan, can be inverted to give a high or low position, or it may be removed.
When you have finished grilling, check that the control knob is returned to the off position.
26 | 7 |
