Hotpoint SY22W manual Prepare installation, door handle, Do not lift the appliance by the

Models: SY22W

1 18
Download 18 pages 5.91 Kb
Page 11
Image 11
Step 1: Prepare installation

Installation Instructions

 

 

Step 1: Prepare installation

90

mm

 

 

(minimum)

door handle.

 

Do not lift the appliance by the

 

 

 

Using the Oven

Oven furniture

Oven shelves

Whilst every care is taken to eliminate burrs and raw edges from this product, please take care when handling - we recommend the use of protective gloves during installation.

Please note that the weight of this appliance is approximately 31kg (unpacked). Take care when lifting it into the housing unit - always use an appropriate method of lifting.

Remove the fixing screws from the polythene bag on the top of the appliance, but leave the appliance in the base tray packaging until you are ready to install it.

If this appliance is to be installed near to a corner where the adjacent cabinets run at right angles forward of the appliance, there must be a gap of at least 90 mm between the appliance and the cabinets, to prevent overheating of the cabinets.

Housing dimensions

The appliance is designed to fit into a standard 600mm wide housing unit with minimum internal dimensions as shown.

591mm is to the underside of the worktop when the appliance is built under, or to the underside of the panel above, when the appliance is installed into a tall housing unit.

min 560mm

The oven shelf must be positioned with the upstand facing upwards.

Position baking trays and roasting tins on the middle of the shelves, and leave one clear shelf position between shelves, to allow for circulation of heat.

Baking tray and roasting tins

For best cooked results and even browning, the maximum size baking trays and roasting tins that should be used are as follows;

Baking tray

350mm x 280mm

This size of baking tray will hold up to 16 small cakes.

Roasting tin

370mm x 320mm

We recommend that you use good quality cookware. Poor quality trays and tins may warp when heated, leading to uneven baking results.

585

mm

595mm

547mm

min

 

- 80mm

20mm

 

 

550mm

 

 

30

 

 

 

 

 

588

12mm

gap

 

 

 

 

 

 

mm

568

 

in

plinth

 

 

 

 

mm

 

 

 

550mm

 

 

 

 

24

min

min

580

590

mm

mm

door handle.Do not lift the appliance by the 6mm

9

Page 11
Image 11
Hotpoint SY22W manual Prepare installation, door handle, Do not lift the appliance by the, Oven furniture Oven shelves