Hotpoint SY22W manual Be Safe - Not Sorry, Check edging strip, Secure appliance into housing unit

Models: SY22W

1 18
Download 18 pages 5.91 Kb
Page 7
Image 7
Be Safe - Not Sorry

Installation Instructions

Be Safe - Not Sorry

Step 4: Check edging strip

The edging strip is factory fitted to the front side edges of the appliance front frame. This strip provides the cabinetry with extra protection from any escape of heat.

When installing the product, ensure that the edging strip is correctly located on the outer edges of the front frame, before positioning and securing the appliance to the cabinet.

seal

front frame

handle door

When securing the appliance, the fixing screws provided are driven through the edging strips into the cabinet - the seal will straighten up and sit flush to the cabinet when the screws are fully home.

Step 5: Secure appliance into housing unit

There are 4 black no 8 x 25mm long chipboard screws for securing appliance to cabinet.

Insert appliance into cabinet and secure - open the oven door and screw the 4 screws through the holes in the front frame.

Note: The unit housing the appliance must be appropriately fixed.

When you are cooking, keep children away from the vicinity of the appliance.

This product is designed as a domestic cooking appliance for the preparation and cooking of domestic food products, and should not be used for any other purpose.

Remove all packaging from the appliance before using for the first time.

Make sure you read and understand the instructions before using the appliance.

Keep electrical leads short so they do not drape over the appliance or the edge of the worktop.

Keep all flammable materials (such as curtains, furnishings & clothing) away from the appliance.

Parts of the appliance may be hot during or immediately after use. Allow sufficient time for the appliance to cool after switching off.

Do not drape tea towels over the flue vents or doors, as this creates a fire hazard.

Do not use aluminium foil to cover the grill pan, or put items wrapped in foil under the grill, as this creates a fire hazard.

Never use the appliance for heating a room.

Do not use the oven with the door inner glass panel removed (glass oven doors only).

Always use oven gloves when removing hot food / dishes from the oven or grill. The oven / grill and utensils will be very hot when in use.

When opening the appliance door, take care to avoid skin contact with any steam which may escape from the cooking.

Do not use foil on oven shelves or allow it to block the oven flue, as this creates a fire hazard, and prevents heat circulation.

When cooking heavy items - eg; turkeys - do not pull the oven shelf out with the item still on the shelf.

Switch off the electricity supply before replacing the oven light bulb to avoid the risk of an electric shock.

All installation, servicing and maintenance work must be carried out by a competent person who will comply with current Regulations, Standards and Requirements.

Warning: This appliance must be earthed.

When you have finished cooking check that all controls are in the off position.

As with all gas appliances, it is recommended that your appliance is serviced regularly.

28

5

Page 7
Image 7
Hotpoint SY22W Be Safe - Not Sorry, Check edging strip, Secure appliance into housing unit, Installation Instructions