Installing the Glass Bowl
7-8. If you want to install the light fixture, proceed with Step 7-9 now.
If you do not want to install the light fixture, you need to uninstall it now. See “Uninstalling the Light Fixture” in Step
7-14. Once you have uninstalled the light fixture, continue with step 7-6.
7-9. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
7-10. Feed the fan and light pull chains as shown in Step 7-10 illustration.
7-11. Install the Pin Base CFL (26 Watt Maximum) into the socket.
7-12. Place the cover plate up against the glass bowl. Align the holes in the cover plate with the grommet hole of the metal disk.
7-13. Screw the finial onto the threaded rod end until tight.
