SEH Computertechnik TPG60 user manual How to Create a Self-signed Certificate?

Certificate Management

What information do you need?

What do you want to do?

•’How to Create a Self-signed Certificate?’ Ö64

•’How to Create a Certificate Request for CA Certificates?’ Ö66

•’How to Save CA Certificates in the TPG60?’ Ö67

•’How to Save Root Certificates in the TPG60?’ Ö68

•’How to Delete Certificates?’ Ö69

8.1How to Create a Self-signed Certificate?

When a certificate is created on the TPG60 for the first time, a list of parameters is displayed that are required for the certificate.

If a self-signed certificate or a CA certificate has already been saved in the TPG60, the content of this certificate will be displayed. In this case you have to delete the existing certificate first; see: ’How to Delete Certificates?’ Ö69.

†’Creating Self-signed Certificates via the TPG Homepage’ Ö64

†’Creating Self-signed Certificates via the InterCon-NetTool’

Ö65

Creating Self-signed Certificates via the TPG Homepage

Proceed as follows:

1.Start the TPG Homepage.

2.Select Configuration – Certificates.

3.Select TPG certificate.

4.Enter the relevant parameters, see: table 6 Ö65.

5.Click Create self-signed certificate.

ªThe certificate will be created and installed. This may take a few minutes.

TPG60 User Manual 64