SEH Computertechnik TPG60 user manual Click Start download

Parameter

8.Edit the file; see: ’Parameter List’ Ö78.

9.Save the file.

Downloading the ’Parameters’ File to one or more TPG60 using the InterCon-NetTool

You can configure one or more TPG60 using the ’parameters’ file. For this purpose, the file is downloaded to the TPG60.

When downloading the ’parameters’ file to several TPG60, the parameter default settings 'IP address,' and 'Host name,' of the respective TPG60 will be maintained. All other settings will be overwritten by the ones in the new ’parameters’ file.

Proceed as follows:

1.Start the InterCon-NetTool.

2.Select one or more TPG60 from the print server list.

3.Select Actions – Download ’Parameters’ File from the menu bar.

4.Click Choose. The Parameter Download dialog appears, see: figure 7 Ö34.

5.Specify the ’parameters’ file.

6.Click Open.

7.Decide on the password option:

If the TPG60 displayed in the list are not password-protected or protected by different passwords, activate Ask for each password.

If the TPG60 are protected by the same password, activate Use this password and enter the password.

8.Click Start download.

By clicking 'Start download', the selected file will be downloaded to all TPG60 displayed in the list. If you do not want to download the file to all TPG60, you must close the window and only select the desired TPG60 from the print server list (see step 2).

9. Confirm the security query.

TPG60 User Manual 35