![](/images/new-backgrounds/1265969/265969165x1.webp)
Parameter List
Table 12: Parameter List - Protection
Parameter | Description | Default | Value |
|
|
|
|
passwd | Password for the access control | [blank] |
|
| If a password was set, you must |
|
|
| enter the password before you |
|
|
| can save the changes to the |
|
|
| TPG60 parameters. |
|
|
|
|
|
|
access_control | Enables/disables the password | off | on/off |
| demand for TPG60 parameters. |
|
|
| (Only makes sense if a password |
|
|
| was set, see parameter 'passwd') |
|
|
|
|
|
|
ip1_sender | IP address or host name of the | * | max. 255 characters |
~ | client allowed to address the |
|
|
ip8_sender | TPG60 in the network. Once an |
|
|
| IP sender has been defined, all |
|
|
| undefined clients lose their |
|
|
| authorization. Up to eight IP |
|
|
| senders can be specified. |
|
|
| Wildcards (*) can be used. |
|
|
|
|
|
|
http | Enables/disables the HTTP | on | on/off |
| protocol on the TPG60 |
|
|
| (The TPG Homepage cannot be |
|
|
| started if the HTTP protocol is |
|
|
| disabled.) |
|
|
|
|
|
|
Table 13: Parameter List - EAP Authentication
Parameter | Description | Default | Value | |
|
|
|
|
|
eap_auth_type | Authentication method applied | 1 | 1 | = none |
| by the TPG60 to identify itself in |
| 2 | = not defined |
| the network. |
| 3 | = |
|
|
| 4 | = |
|
|
|
| |
eap_auth_name | Name of the TPG60 as saved in | [blank] | max. 64 characters | |
| the authentication server |
|
|
|
| (RADIUS). |
|
|
|
|
|
|
| |
eap_auth_pwd | Password of the TPG60 as | [blank] | max. 64 characters | |
| saved in the authentication |
|
|
|
| server (RADIUS). |
|
|
|
|
|
|
|
|
TPG60 User Manual | 83 |