SEH Computertechnik TPG60 user manual How to Adapt the Speed to the Network Components?

Network and Device Settings

What do you want to do?

2.Double-click the TPG60 in the print server list. The Properties dialog appears.

3.Select Configuration – General from the navigation bar.

4.Select the desired language from the TPG language list.

5.Click OK to confirm.

ªThe settings are saved.

5.5How to Adapt the Speed to the Network Components?

You can adapt the speed of the TPG60 to other network components, such as switches or hubs.

The 'Auto' mode is preset. The speed is identified automatically and adapted to the other network components.

If you set the speed manually, the speed must correspond to the speed of the other network components. It is not possible to operate the TPG60 with full duplex if the hub is operated with half duplex.

†’Adapting the Speed via the TPG Homepage’ Ö45

†’Adapting the Speed via the InterCon-NetTool’ Ö46

Adapting the Speed via the TPG Homepage

Proceed as follows:

1.Start the TPG Homepage.

2.Select Configuration – General.

3.Select the desired setting from the Ethernet settings list.

4.Click Save to confirm.

ªThe setting is saved.

TPG60 User Manual 45