Administration Methods

Configuring TPG Parameters

TPG60 parameters can be configured easily and conveniently via the InterCon-NetTool.

Commands can be selected via the toolbar, the shortcut menu (right mouse button), shortcut keys, or the menu bar. This manual describes the selection via the menu bar.

Proceed as follows:

1.Start the InterCon-NetTool.

2.Double-click the TPG60 in the print server list. The Properties dialog appears.

3.Select the desired menu item from the navigation bar in the Configuration category.

4.Change the desired parameters.

5.Click OK to confirm.

ªThe settings are saved.

By clicking the ’?’ icon (on the top right of the dialog) and by pointing at the relevant parameter, you will get an explanation of the parameter. Detailed information can be found in the corresponding chapters of this manual.

TPG60 User Manual

21

Page 21
Image 21
SEH Computertechnik TPG60 user manual Configuring TPG Parameters