Certificate Management

Creating Self-signed Certificates via the InterCon-NetTool

Proceed as follows:

1.Start the InterCon-NetTool.

2.Mark the TPG60 in the print server list.

3.Select Actions – Certificate – Server certificate from the menu bar. The Certificate dialog appears.

4.Tick Create self-signed certificate.

5.Click Next.

6.Enter the relevant parameters, see: table 6 Ö65.

7.Click Next. The parameters are listed.

8.Confirm by clicking Next.

ªThe certificate will be created and installed. This may take a few minutes.

Table 6: Parameters for the Creation of Certificates

Parameter

Description

 

 

Common name

Is used to clearly identify the certificate. It is advisable to use the

 

IP address or the host name of the TPG60 to allow a clear

 

assignment of the certificate to the TPG60. You can enter a

 

maximum of 64 characters.

 

 

E-mail address

Indicates an e-mail address. You can enter a maximum of 40

 

characters. (Optional Entry)

 

 

Organization name

Specifies the company that uses the TPG60. You can enter a

 

maximum of 64 characters.

 

 

Organizational

Specifies the department or subsection of a company. You can

unit

enter a maximum of 64 characters. (Optional Entry)

 

 

Locality name

Specifies the locality where the company is based. You can enter

 

a maximum of 64 characters.

 

 

State name

Specifies the state in which the company is based. You can enter

 

a maximum of 64 characters. (Optional Entry)

 

 

Country name

Specifies the country in which the company is based. Enter the

 

two-digit country code according to ISO 3166. Examples:

 

DE = Germany, GB = Great Britain, US = USA

 

 

Issued on

Specifies the date after which the certificate is valid.

 

 

Expires on

Specifies the date after which the certificate is invalid.

 

 

TPG60 User Manual

65

Page 65
Image 65
SEH Computertechnik TPG60 user manual Creating Self-signed Certificates via the InterCon-NetTool