Security

Requirements

What do you want to do?

If you want to use the EAP-TLS authentication, you must observe the following instructions in the indicated order.

Otherwise the TPG60 cannot be addressed in the network. In this case you have to reset the TPG60 parameters; see: ’How to Reset Parameters to their Default Settings?’ Ö36.

;Create a certificate request on the TPG60; see: ’How to Create a Certificate Request for CA Certificates?’ Ö66.

;Create a CA certificate using the certificate request and the authentication server.

;Install the CA certificate on the TPG60; see: ’How to Save CA Certificates in the TPG60?’ Ö67.

;Install the root certificate of the authentication server on the TPG60; see ’How to Save Root Certificates in the TPG60?’ Ö68.

;Enable the authentication method 'EAP-TLS' on the TPG60.

†’Enabling EAP-TLS Authentication via the TPG Homepage’ Ö61

†’Enabling EAP-TLS Authentication via the InterCon-NetTool’ Ö62

Enabling EAP-TLS Authentication via the TPG Homepage

Proceed as follows:

1.Start the TPG Homepage.

2.Select Configuration – Protection.

3.Select Authentication.

4.Select EAP-TLS from the Authentication list.

5.Click Save to confirm.

ªThe settings are saved.

TPG60 User Manual

61

Page 61
Image 61
SEH Computertechnik TPG60 user manual Enabling EAP-TLS Authentication via the TPG Homepage