SEH Computertechnik How Does the TPG60 Receive Encrypted Data?, Connection Service Parameter

ThinPrint® Settings

ªThe settings are saved.

Table 5: Connection Service Parameter

Parameter	Description
Connection Service	Enables/disables the .print Connection Service
Connection Server	IP address of the server on which the Connection
	Service is installed.
Port	Port number used by the TPG60 to communicate with
	the Connection Service (default = 4001)
Client ID	Client ID as stored in the database of the Connection
	Service. The client ID is needed by the Connection
	Service to forward print jobs to the TPG60.
Authentication key	Authentication key as stored in the database of the
	Connection Service.
Keep alive	Interval (in seconds) for refreshing the connection to
	the Connection Service.
	The value has to be lower or equal than the
	'KeepAliveTO' parameter of the .print Connection
	Service (server side).
	(allowed entry: 30 - 180 default = 60)
Connection retry	Interval (in seconds) for connection retries if the
	Connection Service is not reachable.
	(allowed entry: 5 -6000 default = 120)

If a connection to the Connection Service was refused, it is because a value (client ID, authentication key, or IP address) was entered incorrectly. Check and modify your settings and reestablish the connection to the Connection Service manually. For this purpose, click Reconnect.

6.5How Does the TPG60 Receive Encrypted Data?

A secure connection during the transfer of print jobs between ThinPrint® (server or Connection Service) and the TPG60 is guaranteed by means of an SSL encryption.

TPG60 User Manual 53