Avaya P332G-ML manual Chapter CLI Layer

		Chapter 5	CLI – Layer 2
•	set interface ppp	Configure the device ppp interface	Page 91
•	set port level	Set the priority level of a port	Page 93
•	set port negotiation	Set the auto negotiation mode of a port	Page 93
•	set port enable	Administratively enable a port	Page 94
•	set port disable	Administratively disable a port	Page 94
•	set port speed	Set the speed for a 10/100 port	Page 94
•	set port duplex	Set the duplex mode of a port	Page 95
•	set port name	Assign a name to a port	Page 95
•	set port trap	Enable/Disable the SNMP up/down	Page 96
		link traps sent for port
•	set port vlan	Assign the Port VLAN ID (PVID)	Page 96
•	set port vlan-binding-	Define the port binding method	Page 97
	mode
•	set port static-vlan	Define a multiple VLANs per port	Page 97
•	set port channel	Define a LAG interface	Page 98
•	set port classification	Define port classification	Page 98
•	set port redundancy	Define/Delete a link redundancy entry	Page 99
	on/off
•	set port redundancy	Enables/Disables all the defined link	Page 99
		redundancy schemes
•	set internal buffering	Set internal buffering capacity to	Page 100
		maximum/minimum
•	set boot bank	Configure the boot bank from which the	Page 100
		module will boot
•	set intermodule port	Defines the stack’s unique fast	Page 101
	redundancy	redundancy scheme
•	set intermodule port	Clears the intermodule redundancy	Page 102
	redundancy off
•	set port mirror	Set a port mirroring source-destination	Page 102
		pair in the stack

P332G-ML User’s Guide 83