
Chapter 5 | CLI – Layer 2 |
|
|
Show port vlan-binding-mode Command
Use the show port
The syntax for this command is:
show port vlan-binding-mode [module[/port]]
module/port | The module number/the port |
| number |
Example:
port 1/2 is statically bound port 1/3 is statically bound port 1/4 is statically bound port 1/5 is statically bound port 1/6 is statically bound port 1/7 is statically bound port 1/8 is statically bound port 1/9 is statically bound port 1/10 is statically bound
Show port security Command
Use the show port security command to list the security mode of the ports of a module or stack. When no port number is specified, this command displays all the secured ports in the stack.
The syntax for this command is:
show port security [<module>[/<port>]]
Example:
Port 1/1 port security disabled.
Port 1/2 port security disabled.
Port 1/3 port security disabled.
Port 1/4 port security disabled.
Port 1/5 port security disabled.
56 |