
Chapter 6 | CLI – Layer 3 |
|
|
copy startup-config tftp Command
Use the copy
The syntax for this command is:
copy startup-config tftp <filename> <ip>
filename | file name (full path) |
ip | The ip address of the host |
Example:
Router-N> copy startup-config tftp c:\p332\router1.cfg 192.168.49.10
erase startup-config Command
The erase
The syntax for this command is:
erase startup-config
reset Command
The reset command resets the
If you want to keep changes you made to the current running configuration use the copy
The syntax for this command is:
reset
136 |