MetroSelect™
Code Byte Usage
NOTE!
User Configurable Prefixes, Symbol Length and other features that use these Code Bytes for configura- tion, require that the scanner be in Configuration Mode. Scan the Enter/Exit Configuration Mode bar code before starting the configuration cycle. Single Code Configuration Mode does not work for these
Example #1
User configurable prefix/suffix characters (section E) can be saved into the scanner by scanning the 3 digit decimal equivalent of the ASCII character into the appropriate character location with the code byte bar codes.
Add an Asterisk (*) as a Prefix
1. | Enter/Exit | (3 beeps) |
2. | Configurable Prefix #1 | (1 beep) |
3. Code Byte #0 | (1 beep) | |
4. | Code Byte #4 | (2 beeps) |
5. | Code Byte #2 | (3 beeps) |
6. | Enter/Exit | (3 beeps) |
