MetroSelect™
Host Scanner Commands
Enable “D/E” Disable Command
118115
When this option is chosen, the scan- ner will disable scanning after it receives an ASCII “D” from the host device. It will enable scanning when it receives an ASCII “E.”
*Disable “D/E” Disable
118105
Do not monitor D/E commands.
Enable Z/R Type D/E Simulation
118211
When this option is chosen, the scanner will disable scanning after it receives an ASCII “Z” from the host device. It will enable scanning when it receives an ASCII “R.”
*No “Z/R” Type “D/E”
Simulation
118201
Do not monitor Z/R commands.
