Muratec F-320 C015552009 Yes → Cancel Back, C01Broadcast $/ #/ /Cancel, 5550388 $/ #/ !/Cancel

3 If you want to cancel the command shown, press CANCEL. The following two displays will appear alternately:

C01:5552009		C01:5552009
Yes →	Cancel	No	→	Back

4 To go ahead with canceling the command, press CANCEL. Go back to step 2 to view other delayed commands.

To keep this command but to continue reviewing stored commands, press BACK. Go back to step 2.

To keep this command and stop reviewing commands, press STOP to return your machine to standby mode.

Reviewing or canceling parts of a broadcast

You also can review or cancel certain numbers within a broadcast:

1	Press COMM. CANCEL/CONFIRM..
2	Press		or	to scroll through currently stored broadcast command.
		C01:Broadcast
				$/#/"/Cancel
3
	When the command you want to cancel shown, skip to step 6.
	If you want to review individual numbers within this broadcast, go on to step
	4 without pressing CANCEL.
4	To review individual numbers within this broadcast, press to see the first
	number. The LCD shows:
		9-5550388
				$/#/!/Cancel
5
	Press		or	until you find the number you want to cancel.
6	Press CANCEL, CANCEL. The next number will appear.

If you want to cancel this number, also, repeat this step.

If you want to cancel a different number, go back to step 5.

If you want to go back to reviewing or canceling other command, press .

If you don’t want to cancel any more numbers, press STOP. The machine returns to standby mode.

Basic operation

Printing a delayed command list

Your machine can print a command list which tells you:

•The command’s identification number

•The phone number, or “remote location”

•The start time (this appears in a DD,HH:MM format)

•A “note” telling if the command is a polling or F-Codeoperation (see pages 3.14 for more on polling and 3.24–3.32 for more on F-Code communication).

To print a delayed command list, press MENU, 5, 1, 0, 4 ENTER.

Printing a stored document

Your fax machine can print out each document stored for delayed transmission. To print a stored document, you’ll need to know the document’s command number, which you can get by either reviewing the commands or printing a delayed com- mand list (see above).

1	Press MENU, 4, 3, 5 ENTER. The LCD shows:
		Comm. Stored Doc.
		Command No.	:_
2
	Use the numeric keypad to enter the command’s identification number, 1–99.
3	Press ENTER. Your fax machine will print a copy of the stored document.

View the result of fax transaction

You can see 70 most recent fax transactions and result of each transactions with the following information.

•Assigned number, starting each day at 001

•Remote location called (The destination name)

•Starting date and time

•Result of the call — If preceded by an asterisk (*), this signifies an ECM commu- nication. If preceded by a pound (#), this signifies communication was via the highspeed V.34 modem.

Note: Your machine’s LCD shortens the word Transmission to Tx and the Reception to Rx.

2.7