Muratec F-320 manual Loading paper in paper cassette

Getting started

Loading paper in paper cassette

Before you load paper, note the following:

•After you load paper in fax’s cassette, you must “tell” your machine what size paper you loaded: letter-, legal- or half letter-sized.

You can do this by the “Setting of the paper size” operation. (See page 1.9.)

Note: If you will be using letter-sized paper, there’s no need to adjust the cas- sette; your machine is initially set for Letter-sized paper. Simply attach the LTR sticker to the outside of the paper cassette.

1 Open the paper cassette from the front of your machine by gently

5 Adjust the paper guides to fit the size of paper.

6	Gently push the paper cassette back into its original (closed) position. You’ll
	feel a click when it’s properly in place.

pulling it toward you.

2 While pressing the release lever, slide the paper length guide to select the paper size you want to use.

7 Attach the paper size sticker on the cassette’s front.

Helpful Tip: The paper level indicator on the front paper cassette lets you see how much paper is in the cassette without your having to open the cas- sette. When you see the paper level indicator drop (i. e., show more blue area), make sure you have a supply of paper nearby. Then, when you see the “Please Supply Paper” message on the display, you’ll be ready to refill the cassette.

Paper level indicator

3 Press down the paper lifting plate.

4 Insert the paper into the cassette.

• Before you insert paper in the cassette, stack it so the leading edge and sides of the paper are even.

• Do not stack the paper over the limit mark inside of the cassette.

• Place the edges of the top sheet under the metal tabs on the cassette’s left and right side.

Important: To avoid paper jams, do not refill this paper cassette without first removing all of any paper which may remain in it. In other words, do not just add sheets to an already-loaded stack.

1.8