Muratec F-320 manual Ring Pattern $/ #/Enter, Faxing/receiving first, then talking

When you’ve finished your phone conversation, don’t hang up. Insert the document you want to fax.

To use DRD on your fax machine:

1	Contact your phone company to make sure it has set up DRD service for you. If
	possible, also find out which distinctive ring pattern the phone company has
	assigned you.
2	Press MENU, 2, 2, 1, 4, ENTER. The LCD shows:
		DRD		:Off
				$/#/Enter
3
	Press		or	until the mode you want appears.
	When you select “On”, proceed to step 4.
	When you select “Off”, skip to step 6.
4	Press ENTER. The LCD shows:
		Ring Pattern			:A
				$/#/Enter
5
	Press		or	until the pattern you want appears.
6	Press ENTER to save the setting.

Important: If your telephone company gives you only very general ring pattern specifications, or if you encounter a problem while using your machine’s DRD feature, please try ALL of the listed ring patterns. If you still have a problem after trying all of the patterns, please call the Muratec Customer Support Center. (From the United States, call 800-347-3296.)

Important: With your machine set for using DRD, it won’t respond to any ring pat- tern other than the one you selected above. To reset the fax so it will respond once again to normal rings, select “OFF” in step 3 above. Your fax will now respond normally.

Advanced features

Call request

You can send or receive a fax message and have a regular phone conversation on the same call (although, not at the same time). This is called a call request. It doesn’t matter whether you’re sending the fax or receiving it. You may fax first and then talk, or talk first and then fax.

Important: For this feature to work, the remote fax machine must have a similar call-request capability. Your machine must also have an optional handset attached.

Faxing/receiving first, then talking

To send or receive a fax first and then talk:

1	While your fax machine is sending or receiving the fax, press MONITOR/CALL.
2	At the remote fax machine, the ringer will sound after that machine receives
	each page.
3	If someone answers at the remote fax machine, your fax machine will ring
	several times. If so, pick up the optional handset. In a few seconds, the line

will open and you can begin your conversation.

Talking first, then sending a fax

To talk first and then send a fax:

1

2

3 Adjust the document mode and contrast if necessary.

4 Tell the person at the other fax machine to press START and to hang up his/her handset. Don’t hang up your handset yet!

5 When you hear fax tones, press START and hang up your fax machine’s optional handset. Your fax machine will send the document.

Talking first, then receiving a fax

To talk first and then receive a fax:

1 When you’ve finished your phone conversation, don’t hang up.

2 Tell the person at the other fax machine to press START and to hang up his/her handset. Don’t hang up your handset yet!

3 When you hear fax tones, press START and hang up your machine’s optional handset. Your machine will receive the document and print it out.

3.23