Muratec F-320 manual 03Box NameUpper, 03Sub-Address No Sub-Address In Use, 03Password

2

Select F-Code Box 01:No Number Stored

3 Use the numeric keypad to enter the two-digit number (01-50) of the F-Code box you want to create or modify.

4 Press ENTER. What you do next depends on whether you’re creating or modifying the F-Code box:

If creating — skip to step 6.

If modifying — the LCD asks you to enter the proper I.D. code. The LCD shows:

03:Set F-Code Box Enter I.D. Code:****

5 Use the numeric keypad to enter the 4-digitI.D. code (not the ITU-Tsub- address and not the ITU-Tpassword). Skip to step 7.

Press MENU, 3, 5, 1, ENTER. The LCD shows:

(4) I.D. Code (4 digits)

You will choose the information for each of these elements, and enter it into your machine. The following steps will walk you through entering and changing that information.

To create or modify an F-Code box:

1 Keep pen and paper with you as you follow these steps. As you decide on a sub-address and enter it into your machine, write it down. Remember to:

(1) write down which box goes with which sub-address,(2) write down any passwords or I.D. codes you enter, (3) keep these printed records in a safe place.

* and #

4 elements of an F-Code box

Each F-Code box has the following four elements:

(1) F-Code box number (01-50)

(2) F-Code box name (up to 16 characters)

(3) F-Codesub-address (up to 20 characters - can include numbers and the characters only)

• Relay box — Receives documents, then relays them to other machines. The machine that relays the document is called a “hub”. Your fax machine can either send to a hub or it can be a hub.

Note: If you enter an invalid I.D. code, the fax machine rejects the attempt and aborts this operation.

Note: If you want to modify an existing F-Code box and want to change the box type, you first must erase the old box, then create a new one.

				Advanced features
6	The machine is now asking you to name this F-Code box. The LCD shows:
		03:Box Name;Upper
		_
	If you do not want to enter or change this F-Code box’s name, skip to step 8.
	If you do want to enter or change this F-Code box’s name, go on to step 7.
7	Enter the name by using the numeric keypad. (If necessary, review “Entering
	characters”, page 1.12) An F-Code box’s name can be up to 16 characters in
	length.
8	Press ENTER to save the box’s name and continue. The LCD shows:
		03:Sub-Address No.
		_
	The fax machine now asks for this F-Code box’s sub-address. This is the
	numerical identifier you must enter in order to communicate with any remote
	F-Code compatible fax.
	If you do not want to change an existing sub-address, skip to step 10.
9	Use the numeric keypad to enter the sub-address to identify this F-Code box.
	The sub-address can be up to 20 characters in length and include any
	combination of numbers and the * and # characters (but no other non-
	numeric characters).
	Note: No other F-Code box in this machine can have the same sub-address
		as the one you enter here.
10	Press ENTER to save the sub-address.
	Note: If you entered a sub-address already being used by another F-Code
		box, the machine beeps and briefly displays:
			03:Sub-Address No.
			Sub-Address In Use
		The machine now returns you to step 10. Please enter a different
		number for your F-Code box’s sub-address.
11	Next, the machine asks for your F-Code box’s password. This is the password
	for ITU-T-compatible F-Code fax transactions. The LCD shows:
		03:Password
		_
	Note: You don’t need to have a password for the F-Code box. However, using
		a password will make your F-Code communication much more secure.
	If you do not want to enter or change this box’s password, skip to step 14.

3.25